To Next PageTo Next PageHow to troubleshoot no power on my Sharp AQUOS LC-60E88UN?
First, ensure you've pressed the TV POWER button on the remote. If the indicator light on the TV is off, press the POWER button on the TV itself. Check if the AC cord is properly connected and that the power is turned on.
Why is there no sound on my Sharp LCD TV?
First, verify that all connections to other components are correct. Ensure the volume isn't too low and that MUTE hasn't been activated on the remote. Also, check the audio output of any connected external equipment to confirm it's not muted or set too low. If using HDMI, ensure the audio is configured to output through the HDMI cable. For equipment connected to INPUT 4 or INPUT 6, check the "PC Audio Select" setting. Note that depending on the equipment and media, an audio cable might be needed even with an HDMI connection. If connecting a PC via HDMI, confirm the PC's audio output is correctly configured. If using a DVI-HDMI conversion cable, make sure an audio cable is connected. Finally, check if INPUT 6 is in use, and if so, whether "Input 4 (PC)" is selected in "PC Audio Select".
Why is my Sharp AQUOS LC-60E88UN LCD TV remote not working?
First, ensure the FUNCTION is correctly set to the TV position. Verify that the batteries are inserted with the correct polarity (+/-). If the batteries are old, replace them with new ones. Check if strong or fluorescent lighting is interfering with the remote's signal. Also, make sure a fluorescent light isn't too close to the remote control sensor. Finally, confirm that "RC Control Lock" is not selected in "Operation Lock Out".
What to do if there is no picture on Sharp AQUOS LC-60E88UN LCD TV?
First, check that all connections to other components are correct. Ensure the correct input signal source is selected after making connections and that the correct input is selected on the TV. Verify that "On" is not selected in "Audio Only". When connecting a laptop, ensure the PC's display output mode is set to external monitor. Also, check the resolution setting on the PC to ensure a compatible signal is being input.
Why does my Sharp AQUOS LC-60E88UN LCD TV power off suddenly?
Check if the sleep timer is set. Also, review the power control settings. If the unit's internal temperature has increased, remove any objects blocking the vents or clean the vents to improve airflow.
Why is the picture quality of HD programs poor on my Sharp AQUOS LC-60E88UN?
To enjoy HD images from external equipment, you may need to set up an HDMI or component connection. If the program content itself isn't HD quality, HD images won't be displayed. The cable/satellite set-top box might need configuration to output HD images. The cable/satellite broadcast might not support a signal resolution of 1080p.
How to fix strange colors on Sharp AQUOS LC-60E88UN LCD TV?
Try adjusting the picture tone. Also, consider the room's brightness. A picture may appear dark in a room that is too bright.
How to adjust picture size on Sharp AQUOS LC-60E88UN if the picture is cut off?
Check if the image position is correct. Also, verify that screen mode adjustments such as picture size are made correctly.
Why does my Sharp LCD TV sometimes make a cracking sound?
This sound is normal. It occurs when the cabinet slightly expands and contracts due to temperature changes.
General| Screen Size | 60 inches |
|---|---|
| Display Type | LCD |
| Refresh Rate | 120Hz |
| HDMI Ports | 4 |
| Viewing Angle | 176 degrees |
| Resolution | 1920 x 1080 pixels |
| Audio Output | 10W x 2 |
| Inputs | HDMI, Component, Composite |
Provides essential safety guidelines for operating the television to prevent hazards.
Explains requirements for viewing HD content on the TV.
Instructions for connecting players and set-top boxes via HDMI for high-quality video.
Connects a PC using an HDMI cable for digital video and audio signals.
Connects a PC using a DVI-HDMI cable with analog audio connection.
Connects a PC using an analog RGB cable and stereo minijack audio cable.
Instructions for turning the television power on and placing it in standby mode.
Guide for the initial installation, including language, TV location, and antenna setup.
How to use remote control and TV buttons to access and navigate menus.
Controls automatic brightness (OPC) and backlight for screen illumination.
Adjusts color management (CMS) and color temperature for picture quality.
Optimizes motion clarity, contrast, gamma, and black levels for picture detail.
Includes film mode, digital noise reduction, 3D-Y/C, and monochrome settings.
Adjusts sound quality with treble, bass, balance, surround, and bass enhancer.
Manages power saving, no signal off, and no operation off functions.
Guides through EZ setup, language, TV location, and channel search.
Sets up secret number and manages parental controls for content filtering.
Sets content ratings for TV programs based on age suitability.
Configures blocking for movies based on MPAA rating categories.
Selects and configures blocking for Canadian English/French TV ratings.
How AQUOS LINK allows interactive control of HDMI-connected equipment.
Operating recorders and AV amplifiers using the TV remote.
Selecting screen sizes and aspect ratios for displaying PC images.
Lists common issues like no power, no sound, or picture problems with possible solutions.
Provides solutions for specific error messages like E202 and E203.
