11
Preparation
Connecting the TV
Notes on installing the TV
• Avoid direct sunlight and place the TV in a well-ventilated
location.
• Place the TV in a level location.
• Do not turn on the power of the TV before connecting the AC
cord.
1 Connect the antenna cable.
n
o
p
Standard DIN45325 connector (IEC169-2)
Antenna cable (75-ohm coaxial type: commercially
available)
Room antenna terminal (75-ohm type)
2 Connect external devices.
See pages 28 to 31 for connecting external equipment, such
as a VCR and DVD player.
3 Plug the AC cord in to the AC outlet (product
shape varies in some countries).
2
1
1
Detach the cable tie
on the rear of the TV.
Press cable tie clip
(1) and pull out cable
tie (2) completely to
release.
Cable tie
LC-46LE840X,
LC-52LE840X,
LC-60LE940X only
• Place the TV close to the AC outlet, and keep the power
plug within reach.
• Disconnect the AC cord from the AC outlet if the TV will
not be used for a long period of time.
4 Bundle the cables.
1
Insert the clip into the hole on the TV.
2
Bundle the cables.
Cable tie
CAUTION
TO PREVENT RISK OF ELECTRIC SHOCK, DO
NOT TOUCH UN-INSULATED PARTS OF ANY
CABLES WITH THE AC CORD CONNECTED.
NOTE
• Cable tie is not available with the LC-80LE940X.
Angle adjustment
The TV can be rotated up to 20 degrees to the right or left.
LC-46LE840X, LC-52LE840X, LC-60LE940X
20°
20°
Front
CAUTION
• Adjust the screen with both hands. Place one hand on the TV
and rotate the screen while holding the bottom of the stand
with your other hand.
NOTE
• Angle adjustment is not available with the LC-80LE940X.
LC80LE940X_EN_book.indb 11LC80LE940X_EN_book.indb 11 8/29/2012 8:53:50 AM8/29/2012 8:53:50 AM
To Next Page
Loading...
