Sharp AQUOS sense2

- 33 -
Wi-Fi
If you use Wi-Fi function of the handset, you can use email or Internet by
connecting to access points of your home, corporate network or public
wireless LAN service.
1
Home screen
u
[ ]
u
[Network & Internet]
u
[Wi-Fi]
2
Set to On
3
Select an access point
z If you select an access point protected by security, enter the password
(security key) and select [CONNECT].
z To register access points manually: [Add network]
u
enter the network
name
u
set security
u
[SAVE]
z When you touch [Saved networks], the access point that you have
accessed is displayed.
 Wi-Fi settings
1
Home screen
u
[ ]
u
[Network & Internet]
u
[Wi-Fi]
u
[Wi-Fi preferences]
2
Select an item
 Open network notification: Set whether to display a notification icon
when an open network is detected.
y Set it after setting [Wi-Fi] to On.
 Internal IP phone settings: Make settings for Internet call.
 Install certificates: Install certificates.
 Network rating provider: Make settings for the network rating provider.
 Wi-Fi Direct: Make settings for Wi-Fi Direct.
 WPS Push Button: Set the Wi-Fi with WPS Push Button.
y Push the WPS button of the access point. An access point is
detected automatically and starts registration.
 WPS Pin Entry: Set the Wi-Fi with WPS PIN.
y Input the PIN displayed on the screen to the access point.
 MAC address: Confirm the MAC address.
 IP address: Confirm the IP address.