Sharp AQUOS sense2

- 40 -
Fingerprint authentication
Fingerprint authentication is an authentication function that is operated
by touching the fingerprint sensor with a finger. You can unlock the touch
panel, etc.
 Registration of fingerprint
You can register up to five fingerprints to use for fingerprint authentication.
z If the fingerprint sensor fails to read a fingerprint, try again using another
finger.
z Set Screen lock to other than [None] or [Swipe].
1
Home screen
u
[ ]
u
[Security & location]
u
[Fingerprint]
z Fingerprints can also be set in Home screen
u
[ ]
u
[AQUOS
Useful]
u
[Fingerprint sensor]
u
[Register].
2
[NEXT]
z Unlock the screen by method set in Screen lock.
3
[NEXT]
4
Touch the fingerprint sensor with your finger
ball
z To register a wide range of the fingerprint, touch it repeatedly while
shifting the touching position gradually.
5
[DONE]
z If you continue to register another fingerprint, select [ADD ANOTHER].
z Note that if Screen lock is set to [None] or [Swipe], registered fingerprints
are deleted.