Sharp AQUOS sense2

- 35 -
Location
Make settings for measuring location information.
1
Home screen
u
[ ]
u
[Security & location]
u
[Location]
2
Set to On
z The confirmation screens for the use of location information are
displayed. The mode to be set may differ depending on whether you
select [NO]/[YES].
3
Select an item
 Mode: Set a mode to measure location information.
 App-level permissions: Make settings for apps that the use of location
information is permitted.
 Scanning: Set whether the location information services or apps
scan Wi-Fi networks or Bluetooth devices to improve the location
information.
z It is necessary to set [Location] to On to measure the present location.
Some apps require that settings be made for location information using
the app.
[Mode]
z The following modes can be set.
 High accuracy: Measure location information with using GPS, Wi-Fi,
Bluetooth or mobile networks.
 Battery saving: Measure location information with using Wi-Fi,
Bluetooth or mobile networks.
 Device only: Measure location information using GPS and the handset
sensors.
z Power consumption of the handset may increase depending on the set
mode.