Sharp AQUOS XU Series LC-70XU830X - Using the Touchpad Remote Control Unit

SlidefromtheleftedgetothecentertodisplaytheDevices
peekscreen.
Slidefromtheleftedgetotherightedgetodisplaythe
Devicesfullscreen.
UsingtheTouchpadRemoteControlUnit
Preparation
BeforeusingtheTouchpadRemoteControlUnit,youhavetofollowtheprocedureshownbelowtopair
theunitwiththeTV.
1Select
(HOME)>"Settings">"Remote&accessories">"Addaccessory".
2Pressthe (HOME)and (Back)buttonsontheTouchpadRemoteControlUnitatthesame
timefor5seconds.
About20secondslater,"SHARPRemotecontroldevice"isshownonTVscreen.
3Select"SHARPRemotecontroldevice"onTVscreen,andthenpress
(ENTER)ontheIR
RemoteControl.
About5-10secondslater,PAIREDisshown.Preparationiscomplete.
NOTE
Inpreparation3,ifCOULDN'TPAIRisshown,pleasetry"preparation1-3"again.
Pairingsuccess/failuremaybeinfluencedbythesurroundingwireless/RFenvironment.
Mouse/Flickmodeswitchbutton
SwitchthetouchpadbetweenMousemodeandFlickmode.
NOTE
ThedefaultisFlickmode.
SomeappsmaynotfunctioninMousemode.Ifanappdoesnotfunction,switchtoFlickmode.
Slidebar
YoucanslidetodisplaytheDevicesscreen.
HowtoselecttheTVMode
EN2-2
ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNGVIỆT | ﻲﺑرﻋ | АҒЫЛШЫН | O'ZBEKTILIDA
>><<