Sharp AQUOS XU Series LC-70XU830X - Devices

Devices
Fullscreenview
SwitchingbetweenconnecteddevicesispossibleontheDevicesfullscreen.
1.Press
/ / / toselecttheinputsource,andthenpress (ENTER).
2.Press / toselectthe"SwitchtoDevice",andthepress (ENTER).
Animagefromtheselectedsourceautomaticallydisplays.
Ifthetargetinputisnotconnected,youwillbeabletoswitchtotheinput,butthecorrectvideoandaudiowillnotbeoutput.Besuretoconnectthe
equipmentbeforehand.
NOTE
TodisplaytheDevicesinthefullscreenorasapeekscreen,seepage2-1.
Changingfromafullscreenviewtoanothermodeispossible.
HowtoselecttheTVMode
EN2-8
ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNGVIỆT | ﻲﺑرﻋ | АҒЫЛШЫН | O'ZBEKTILIDA
>><<