3
Multi-Access
Modes and the display
The display shows the base screen or function setting screen of the currently selected mode. During
operation, or during the execution of a walkup job, the display of the corresponding mode appears.
When there is no walkup job, or during the execution of a print or fax print job, the display shows
"PRINTING". If any key is pressed, this display changes to the display of the currently selected mode.
Modes and data status lights
There are data lights above the PRINT, SCAN, and FAX keys. These light and blink to indicate the
status of data.
Print mode
Scan mode
Fax mode
Modes and key operator programs
The key operator programs are used to program settings that are necessary or useful for functions.
The programs can be accessed from any mode (copy, fax, print, or scan). When the setting is
completed, the machine returns to the original mode.
To access the key operator programs, press the FUNCTION key. Information on the programs is
contained in the operation manuals for each of the modes.
Illuminates steadily Blinks
Online light Online -
Data light Data in memory Processing data or printing
Illuminates steadily Blinks
Data light Data in memory Sending
Illuminates steadily Blinks
Sending light Line in use -
Data light Fax transmission job in fax
memory
Received fax in fax memory, or
transmission job in memory
Downloaded from: http://www.usersmanualguide.com/
To Next Page
Loading...
