7
Multi-Access Operation
Procedures for Using Multi-Access
1) Interrupting a copy job
1
Press the INTERRUPT key during a copy job.
●
Copying stops temporarily and the job can be interrupted. Details can be found in
the operation manual for the unit.
2) Changing to a different print job during a copy job or auto print job
The procedure for changing to a print job during a copying job is explained here.
1
Press the JOB STATUS key. ( page 5)
2
Select "JOB OUTPUT" with the keys and then press the OK
key. ( page 6)
3
Select a job whose status is "WAITING" with the keys, and
then press the OK key.
4
Select "YES" with the keys and then press the OK key.
●
The current job temporarily stops and the selected job is printed.
5
Press the START key to recommence copying.
●
The interrupted job recommences.
Notes
●
You can change to fax print job or a print job during copying.
●
You can change to a fax print job during a print job, or change to a print job during a fax
print job.
●
If the current job is a two-sided copying, two-sided printing, 2in1/4in1 copying, or interrupt
copying job, you cannot change to another job.
Change to printer
output?
YES
NO
Downloaded from: http://www.usersmanualguide.com/
To Next Page
Loading...
