Multi-Access
6
Displaying the print job status menu
The job type, job status, paper tray, and paper size appear in the print job status menu.
The procedure for displaying the print job status menu from copy mode is explained here.
1
Press the JOB STATUS key. ( page 5)
2
Select "JOB OUTPUT" with the key and then press the OK
key.
●
The print job status menu appears.
Contents of the print job status menu
Use the key to move through the print job status menu. For example, the following display
shows the print job icon for the job type, "WAITING" for the job status, and "TRAY 1:A4" for the tray
and paper size.
Example:
Job types
Job status
Paper tray and paper size
The paper tray and paper size used for the job are displayed. However, if the job status is
"NO TRAY", only the paper size appears.
Print job
Fax print job
NONE There are no print jobs.
PRINTING A print job is being printed.
WAITING The job is waiting or interrupted because another job is being printed.
NO PAPER The job is interrupted because there is no paper.
EXIT FULL The job is interrupted because the exit tray is full.
PROCESSING Data is being processed for a print job.
NO STAPLES The job is interrupted because there are no staples.
PRINT DISABLED
Printing is not possible because a paper misfeed has occurred, there
is no more toner, or the drum life is over.
NO TRAY A tray with the selected paper size has not been set.
JOB OUTPUT
WAITING
TEXT/FOTO
TRAY1:
A4
[OK]:CHANGE OUTPUT
Downloaded from: http://www.usersmanualguide.com/
To Next Page
Loading...
