Sharp AR-208D - User Manual

Other manuals for Sharp AR-208D

Questions and Answers

C
christopher48Jul 29, 2025
Why is the printed image skewed on my Sharp All in One Printer?
- B
  Brent JohnsonJul 30, 2025
  If the printed image from your Sharp All in One Printer is skewed or runs off the paper, check that the "Paper Size" options match the paper loaded in the tray. Also, in the printer driver setup, go to the "Paper" tab and verify that the "Image Orientation" is correctly set. Ensure that the paper is properly loaded and that the document margins and paper size settings in your application are correctly specified.
S
stewartashleyAug 4, 2025
How to improve scanning quality on Sharp All in One Printer?
- R
  robertrobersonAug 4, 2025
  If you're experiencing poor scanning quality with your Sharp All in One Printer, regularly clean the document glass and the underside of the RSPF. Ensure that you are using a clean original document. Also, check that the resolution setting in the scanner driver is appropriate for the original you are scanning.
K
Kathryn DavenportAug 9, 2025
Why is my Sharp All in One Printer unable to scan the image?
- J
  John GallagherAug 9, 2025
  If you are unable to scan images with your Sharp All in One Printer, restart your computer, turn off the printer, unplug it, then restore power and try scanning again. If your application is not TWAIN/WIA compliant, scanning will not be possible. Scanning a large area in full color at high resolution results in a large amount of data and extended scanning times.
M
Mindy RussellAug 14, 2025
What to do if specified paper size has not been loaded in Sharp All in One Printer?
- B
  Bethany OlsonAug 14, 2025
  Load the specified size of paper in the paper tray of your Sharp All in One Printer.
A
Ashley ChavezAug 19, 2025
How to increase scanner transfer speed on Sharp All in One Printer?
- E
  Ethan WilliamsAug 19, 2025
  To improve the scanner transfer speed of your Sharp All in One Printer, see "System requirements for USB 2.0 (Hi-Speed mode)" in the Operation Manual to configure your system as required for USB 2.0, and then set "USB2.0 MODE SWITCH" in the user programs to "HI-SPEED".
N
Nathaniel TrujilloAug 25, 2025
How to disable ROPM function on Sharp All in One Printer?
- M
  mccoylaceyAug 25, 2025
  If a Notice Page is printed from your Sharp All in One Printer, disable the ROPM function by removing the checkmark from "ROPM" in the "Configuration" tab of the printer driver setup screen.

Sharp AR-208D Specifications

General

Type	All-in-One Printer
Functions	Print, Copy, Scan
Print Speed	20 ppm
Resolution	600 x 600 dpi
Paper Capacity	250 sheets
Memory	32 MB
Interface	USB 2.0
Scan Resolution	600 x 600 dpi
Max Paper Size	A4
Scanner Type	Flatbed
Zoom Range	25-400%
Scan to	Email, USB
Connectivity	USB
Copy Speed	20 ppm (A4)
Original Size	A4
Paper Weight	60 to 163 g/m²