7
MAIN FEATURES
High-speed laser copying
First-copy time*
1
is only 8.0*
2
seconds.
Copying speed is 20 copies per minute. This is ideal for business use and provides a
big boost to workplace productivity.
*
1
The first-copy time is measured after the power save indicator turns off following
power on, using the document glass with the polygon rotating in the copy ready state
and "LSU SETTING" set to ON in the user programs (8-1/2" x 11", paper fed from
paper tray).
*
2
When user program 24 is set to OFF.
High-quality digital image
• High-quality copying at 600 dpi is performed.
• In addition to automatic exposure adjustment, two original modes can be selected:
"TEXT" for text-only originals, and "PHOTO" for photographs. The exposure can be
adjusted to five levels in each mode.
• The photo mode copying function allows clear copying of delicate halftone original
images such as monochrome photos and color photos.
Enhanced copying features
• Zoom copies can be made from 25% to 400% in increments of 1%. (When the
RSPF is being used, the zoom copy ratio range is 50% to 200%.)
• Continuous copying of up to 99 copies is possible.
• Sets of output can be offset from each other for easy separation (offset function).
• Sorting by sets is possible without the need for a sorter or other special device
(Sort copy).
• Includes convenient features such as margin shift, 2 IN 1 copy, and automatic two-
sided copying.
Scan once/Print many
• The machine is equipped with a memory buffer allowing the machine to scan an
original once and make up to 99 copies of the scanned image. This improves
workflow, reduces operating noise from the machine and reduces wear and tear on
the scanning mechanism, which provides for a higher reliability.
A
Margin shift
Sort copy Offset function
2 IN 1 copy
2
1
3
2
1
3
1
2
3
2
1
3
1
1
1
2
3
A
!AR-208S_208D.book 7 ページ ２００７年１２月３日 月曜日 午後３時３３分
To Next Page
Loading...
Need help?
General
