SPECIFICATIONS
43
CONTENTS
INDEX
Printer specifications
*
1
300 dpi can only be selected when using the PCL6 or PCL5e printer driver.
*
2
For information on machine memory, see the manual for the machine.
*
3
Available only if the PS3 expansion kit (AR-PK1N) is installed.
Printing speed Max. 20 ppm (when printing on letter size paper)
Resolution 600 dpi / 300 dpi*
1
Network expansion kit memory*
2
Standard memory: 64 MB
Additional memory slot: 1 slot (a 128 MB or 256 MB of additional memory module (144-pin SDRAM
SODIMM) can be installed)
Emulation PCL5e, PCL6, PS3 (PostScript 3)*
3
Installed fonts
PCL6/PCL5e compatible: 80 outline fonts and 1 bitmap font
PostScript 3 compatible*
3
: 136 outline fonts
Interface 10Base-T/100Base-TX Ethernet
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product
improvement without prior notice. The performance specification figures indicated are nominal values of production units. There
may be some deviations from these values in individual units.
Note
To Next Page
Loading...
Need help?
General
