PRINTER UTILITIES (WINDOWS)
18
CONTENTS
INDEX
Using the printer utilities
(part 1)
Starting up the printer utilities
If the Printer Status Monitor or Printer Administration Utility is
not running, use the following procedure to start the utilities.
Printer Status Monitor
Click the "Start" button, point to "All Programs" ("Programs" in
operating systems other than Windows XP/Server 2003/Vista)
and then "SHARP Printer Status Monitor". Select "Printer
Status Monitor".
Printer Administration Utility
Click the "Start" button, point to "All Programs" ("Programs" in
operating systems other than Windows XP/Server 2003/Vista)
and then "SHARP Printer Administration Utility". Select "Printer
Administration Utility".
Using the printer utilities
For information on using the Printer Status Monitor and Printer
Administration Utility, see the Help files for each. The Help files
can be viewed as follows:
Printer Status Monitor
Click the "Start" button, point to "All Programs" ("Programs" in
operating systems other than Windows XP/Server 2003/Vista)
and then "SHARP Printer Status Monitor". Select "Help".
Printer Administration Utility
Click the "Start" button, point to "All Programs" ("Programs" in
operating systems other than Windows XP/Server 2003/Vista)
and then "SHARP Printer Administration Utility". Select "Help".
When the Printer Administration Utility is first started up,
the TCP/IP settings window appears. To monitor the
machine on a local network, select the "Local Subnet
Search" checkbox. Otherwise, enter the machine's IP
address. For more information, see the Help file.
Note
To Next Page
Loading...
Need help?
General
