FINISHER (AR-FN5)
112
OPTIONAL EQUIPMENT
Misfeed removal
The copier will stop when a misfeed occurs. The message "Clear paper path." will appear along with a
display of paper misfeed locations. When a misfeed is indicated for the finisher, follow the procedure
below.
1
Pull the handle of the stapler compiler cover and open the cover.
2
Remove any misfed paper from the transport area.
3
If staple sort copying is being done, open the paper guide and remove
any misfed paper from the stapler compiler.
00EX.book112ページ２００１年５月２５日 金曜日 午前１０時４９分
To Next Page
Loading...
