TWO-SIDED COPYING
28
MAKING COPIES
7
Place the second original face down on the platen glass and press the
START ( ) key again.
●
To stop a copy run during duplex copying, press the CLEAR (C) key.
●
To cancel the duplex copy mode, press the 2-SIDED COPY key, select the one-sided to
one-sided mode, and press the OK key.
●
If an uneven number of originals are being copied, press the READ-END key after the
last original is scanned. The last copy will be output single-sided.
00EX.book28ページ２００１年５月２５日 金曜日 午前１０時４９分
To Next Page
Loading...
