Sharp AR-5316 User Manual (English)

Other manuals for Sharp AR-5316

Operation Manual80 pages

Service Manual56 pages

Brochure & Specs4 pages

Questions and Answers:

B
Benjamin RobinsonAug 16, 2025
Why plug and play screen does not appear when using a USB cable with Sharp All in One Printer?
- J
  Joseph HernandezAug 16, 2025
  If the Plug and Play screen does not appear when using a USB cable, and the "Universal Serial Bus controllers" shows a yellow exclamation point or does not appear, check your computer manual for USB troubleshooting or contact your computer manufacturer. Once you have verified that the USB port is enabled, install the software as explained in "INSTALLING THE PRINTER DRIVER".
R
Ruth GreenAug 19, 2025
Why does my Sharp All in One Printer not operate?
- E
  Eric EvansAug 19, 2025
  Your Sharp All in One Printer might not be operating due to several reasons: it might not be plugged into a power outlet (plug it into a grounded outlet); the power switch might be off (turn the power switch on); the POWER SAVE indicator may be blinking, indicating the machine is warming up; the front or side cover might not be completely closed (close the cover); the machine might be in auto power shut-off mode (press the [START] key); or the PAPER SIZE indicator might be blinking (change the paper size setting by using the [TRAY SELECT] key, opening and closing the tray, or pressing the [CLEAR ALL] key).
S
Stacey ConradAug 22, 2025
What to do if my Sharp All in One Printer does not print and the ON LINE indicator does not blink?
- X
  xgrayAug 22, 2025
  If your Sharp All in One Printer isn't printing and the ON LINE indicator isn't blinking, it could be due to several reasons. The machine might be set to off-line mode (press the [ON LINE] key), the connection with your computer might be faulty (check the printer cable), a copy job might be in progress (wait until it is complete), the port setting might be incorrect (set the port correctly), the wrong machine might be selected in the application for the print job (select the SHARP AR-5316 printer in the Print dialog box), or the printer driver might not be installed properly (delete the AR-5316 software and reinstall it).
Z
Zachary WatsonAug 28, 2025
Why are copies from my Sharp All in One Printer too dark or too light?
- C
  christophergibsonAug 28, 2025
  If copies from your Sharp All in One Printer are too dark or too light, ensure you've selected the correct original type using the [AUTO/TEXT/PHOTO] key or manually adjust the exposure with the [Light] and [Dark] keys. Also, adjust the automatic exposure level if the copy is still too light or dark even when AUTO is selected.
M
Megan HarveyAug 31, 2025
What to do if my Sharp All in One Printer does not print and the ON LINE indicator is blinking?
- S
  Sarah ShepherdAug 31, 2025
  If your Sharp All in One Printer is not printing and the ON LINE indicator is blinking, it might be due to mismatched tray size settings between the machine and the printer driver (ensure they match). It could also be that the specified paper size hasn't been loaded (load the correct paper size). Additionally, if the PAPER SIZE indicator is blinking, you can manually select a tray using the [TRAY SELECT] key or load paper in the bypass tray and press the [ON LINE] key to begin printing.
M
Mr. Jeffrey Evans MDSep 3, 2025
Why are there wrinkles on paper from my Sharp All in One Printer, or why does the image disappear?
- S
  Samuel ReedSep 3, 2025
  Wrinkles and image disappearance on paper from your Sharp All in One Printer can occur if the paper is outside the specified size and weight range (use paper within the specified range). Also, paper that is curled or damp can cause this issue (avoid using curled or crimped paper; replace with dry paper and store it properly).
D
Debbie CastroSep 6, 2025
Why are there blank copies from my Sharp All in One Printer?
- W
  William WilliamsSep 6, 2025
  Blank copies from your Sharp All in One Printer are likely because the original is not placed correctly. Ensure the original is face up in the SPF or face down on the document glass.
E
Elizabeth AndersonSep 9, 2025
Why is part of the image cut off or why is there too much blank space on copies from my Sharp All in One Printer?
- M
  Mary MartinezSep 9, 2025
  If part of the image is cut off or there's too much blank space on copies from your Sharp All in One Printer, it could be due to incorrect placement of the original (place the original correctly). It might also be due to an inappropriate ratio used for the original and paper size (press the [AUTO IMAGE] key). Another reason could be changing the paper size in the tray without updating the tray's paper size setting (always change the tray's paper size setting when you change the paper size).

Sharp AR-5316 Specifications

General

Copying Process	Laser
Copy Speed	16 ppm
Resolution	600 x 600 dpi
Warm-up Time	45 seconds
Print Resolution	600 x 600 dpi
Max Paper Size	A3
Power Consumption	1.2 kW
Functions	Copy
Original Size	Max. A3
Paper Weight	Tray: 56 - 90 gsm, Bypass tray: 56 - 128 gsm
Paper Capacity	350 sheets (250-sheet tray + 100-sheet multi-bypass tray)
Zoom Range	25% to 400% in 1% increments