Sharp AR-6020V - Page 49

AR-6020V SIMULATIONS 6-10
25 04 Toner adjustment value display
When this mode is executed, the toner adjustment value and the setting values are displayed on the number of
copies display. By pressing the [Copy ratio] key, the setting is changed in order. When the negative value is
displayed, the [Developer replacement required indicator lights.
26
02 Size setting
When this mode is executed, the current setting values are displayed
When [START] key is pressed, the settings are written to the EEPROM and the machine goes into the sub code
input standby mode.
Enable/Disable setting of FC (8.5" x 13") size detection and Mexican legal size detection.
Press [Density Select] key to change over the lighting lamp, and enter the code number to set the document size
detection.
Detection size when FC (8.5" x 13") and Mexican legal size documents are used.
* For the other destinations, this setting is disabled.
03 Auditor setting
Used to set the auditor.
* When the coin vendor mode is selected, if the auditor setup is ON and the default tray is bypass tray, the
default tray setup must be changed to the 1st tray.
Main
code
Sub
code
Contents Details of operation
No. Contents Setting Display Range
1 ATC sensor - O 0 - 255
2 Toner control standard value (Correction value is included.) - O 0 - 255
3 Auto developer adjustment value - O 0 - 255
4 All correction standard value - O 0 - 255
5 Life correction value - O -128 - 127
6 Environmental correction value - O -128 - 127
7 Duplex correction value - O -128 - 127
8 Printing rate correction value - O -128 - 127
9 Area correction value - O -128 - 127
10 Area for Auto developer adjustment - O 0 - 8
11 Current area - O 0 - 8
Code number Mode
0
1
2
3
4
5
6
7
Inch-1
Inch-2
Inch-3
AB-1
AB-2
AB-3
AB-4
AB-5
No. Contents Setting Display Range Note
1 Document/paper size type setting - O 0 - 3 0 : Inch-1/ 1:AB-A/ 2:AB-B/ 3:AB-C
2 RSPF Document/paper size type setting - O 0 - 7
0 : Inch-1/ 1:Inch-2/ 2:Inch-3/ 3:AB-1/ 4:AB-
2/ 5:AB-3/ 6:AB-4/ 7:AB-5
3 Exclusion(1) setting - O 0 - 3
0 :8.5x14/ 1:8.5x13.5/ 2:8.5x13.4/ 3:8.5x13
00 : Don’t care
LED Code number Setting
AUTO indicator
AUTO indicator
TEXT indicator
TEXT indicator
0
1
0
1
FC detection disable
(The following set values indicated with are ignored.)
(Follow the setting marked with .)
Mexican legal detection disable (FC detection enable)
Mexican legal detection enable (FC detection disable)
Unit to be
used
Destination Document size
Detection size
When the AUTO
indicator is
turned on: 0
When the AUTO indicator is turned
on: 1
When the TEXT
indicator is
turned on: 0
When the TEXT
indicator is
turned on: 1
Document RSPF
EX Japan
AB series
(FC)
FC (8.5" x 13") B4 FC (8.5" x 13")
Mexican legal
(8.5" x 13.4")
B4 B4 FC (8.5" x 13")
Mexican legal
(8.5" x 13.4")
Inch series
(FC)
FC (8.5" x 13") LG (8.5" x 14") FC (8.5" x 13")
Mexican legal
(8.5" x 13.4")
LG (8.5" x 14") LG (8.5" x 14") FC (8.5" x 13")
Mexican legal
(8.5" x 13.4")
Code number Mode
0
1
2
Built-in auditor mode (Default)
Coin vendor mode
Other
：