Sharp AR-6020V - Firmware Update Procedure; Preparation for Firmware Update; Install USB Driver Procedure

AR-6020V FIRMWARE UPDATE 8-1
[8] FIRMAWARE UPDATE
* AR-6020/6023/AR-6020D/AR-6023D/AR-6020N/AR-6023N/AR-6026N/AR-6031N only.
1.Preparation
Write the download data (the file with the extension dwl) to the main
body.
Necessary files for download
- Maintenance.exe (Maintenance software)
- ProcModel****.mdl
- ProcModel****.ini
- ProcModel****.fmt
“****” is the specific character string, corresponding to model.
- SFAXNoXXX.fld
- Mainte.inf
- Usbscan.sys
Download file:***.dwl
<Note>
•The Download file(***.dwl ) and the like that are to be downloaded
should be copied, in advance, into folders that have a maintenance
program.
•When creating a folder for a maintenance tool in the PC, be sure that no
lengthy folder name is included in the path.
(Example)
Incorrect : C:\________Long Path________\V0428\Service
Correct : C:\V0428\Service
2.Install USB Driver procedure
* This operation is need once on a PC.
1) Main body side:
Executable by performing the Service Simulation No. 49-01 (Flash
Rom program-writing mode).
(The AUTO/TEXT/PHOTO key indicator blinks,).
2) Connect the PC and the main body with the download cable
(USB cable).