78
APPENDIX
* The first-copy time and warm-up time may vary depending on the power-supply voltage, ambient temperature, and other
operating conditions.
Printer Function
Dimensions
23-15/64" (W) x 22-23/32" (D) x 18-33/64" (H)
(590 mm (W) x 577 mm (D) x 470 mm (H))
23-15/64" (W) x 22-23/32" (D) x 21-55/64" (H)
(590 mm (W) x 577mm (D) x 555mm (H))
Operating conditions Temperature: 59°F to 86°F (15°C to 30°C), Humidity: 20% to 85%
Noise level
Sound Power Level L
wA(1B=10dB)
Copying: 6.2[B]
Standby: 3.1[B]
Sound Pressure Level L
pA (bystander positions)
Copying: 48[dB(A)]
Standby: 16[dB(A)]
Sound Pressure Level L
pA (operator position)
Copying: 50[dB(A)]
Standby: 18[dB(A)]
Noise emission measurement in accordance with ISO 7779.
Emission concentration
(measured according to
RAL-UZ62)
Ozone: 0.02 mg/m
3
or less
Dust: 0.075 mg/m
3
or less
Styrene: 0.07 mg/m
3
or less
Print speed
AR-M205 Max. 20ppm / AR-M160 Max. 16 ppm
(Dual function board must be installed)
Resolution 600 dpi
Memory AR-M160: 16 MB, AR-M205: 32MB
Emulation SHARP GDI
Memory expansion
Up to 256 MB can be only added by installing a 256 MB optional memory (AR-SM5)
in one DIMM expansion slot (dual function board must be installed)
Interface port
IEEE1284 parallel port/
USB port (USB1.1), USB port (USB2.0, dual function board must be installed)
Interface cables
[Parallel cable]
Shielded bi-directional (IEEE1284) cable (max. length 10 feet (3 m))
Please purchase a commercially available parallel cable.
[USB cable (only for connection to USB 1.1 port)]
Shielded twisted pair cable (max. length 10 feet (3 m))
[USB cable (only for connection to USB 2.0 port)]
Shielded twisted pair cable (max. length 10 feet (3 m), must support USB 2.0)
Please purchase a commercially available USB cable.
To Next Page
Loading...
