Sharp AR-M236

2
5
TROUBLESHOOTING AND MAINTENANCE
DISPLAY MESSAGES..................................... 57
TROUBLESHOOTING ..................................... 59
MISFEED REMOVAL....................................... 63
● MISFEED REMOVAL GUIDANCE .................63
● MISFEED IN THE RSPF.................................64
● MISFEED IN THE BYPASS TRAY .................65
● MISFEED IN THE MACHINE..........................65
● MISFEED IN THE CENTRE TRAY.................67
● MISFEED IN THE UPPER PAPER TRAY ......67
● MISFEED IN THE LOWER PAPER TRAY .....68
● MISFEED IN THE UPPER EXIT AREA
(when a job separator tray kit or finisher
(AR-FN5N) is installed) ...................................69
● MISFEED IN AN OUTPUT TRAY
(when a finisher (AR-FN5N) is installed).........69
REPLACING THE TONER CARTRIDGE ........ 71
STAPLE CARTRIDGE REPLACEMENT......... 72
● STAPLE JAM REMOVAL ...............................73
CHECKING THE TONER QUANTITY AND
TOTAL OUTPUT COUNT ................................ 73
CLEANING THE MACHINE............................. 74
● DOCUMENT GLASS AND DOCUMENT
COVER/RSPF.................................................74
● THE BYPASS TRAY PAPER FEED
ROLLER..........................................................74
6
PERIPHERAL DEVICES AND SUPPLIES
PERIPHERAL DEVICES.................................. 75
● FINISHER (AR-FN5N) ....................................76
● 500-SHEET PAPER FEED UNIT/
2 x 500-SHEET PAPER FEED UNIT..............78
● REVERSING SINGLE PASS FEEDER .........79
STORAGE OF SUPPLIES ............................... 78
● PROPER STORAGE ......................................78
7
APPENDIX
SPECIFICATIONS ........................................... 79
INDEX............................................................... 89
● INDEX BY PURPOSE.....................................92