Sharp AR-M350U

AR-M350 SIMULATIONS 10-8
66 15 Used to set the make time in the FAX pulse dial mode (20PPS)
and to test the dial signal output. (The dial number signal set
with SIM 66-13 is outputted.) Used to check dialing troubles
and the operation. (Only when FAX is installed.)
Setup Fax Operation
16 Used to test the dial signal (DTMF) output in the FAX tone dial
mode. (The dial number signal set with SIM 66-13 is outputted.)
The send level can be set to an optional level.
Dialing troubles and operation.(Only when FAX is installed.)
Setup Fax Operation
17 Used to test the dial signal (DTMF) output in the Fax tone dial
mode. Send level 0db (Max.).Used to check the operation.
(Only when FAX is installed.)
Setup Fax Operation
18 Used to test the dial signal (DTMF) in the FAX tone dial mode.
The send level set with the soft switch is outputted. Used to
check the operation. (Only when FAX is installed.)
Setup Fax Operation
19 Used to backup the FAX SRAM data into the flash
Memory(Option FAX memory:AR-MM9)
(Only when FAX is installed.)
Setup Fax Operation
20 Used to restore the backup data (SIM 66-19) to SRAM.
(Only when FAX is installed.)
Setup Fax Operation
21 Used to print the FAX information (registrations, communication
management, file management, system errors).
(Only when FAX is installed.)
Adjustment, setup,
operation data output,
check (display, print)
Fax Data
22 Used to adjust the handset sound volume.
(Only when FAX is installed.)
Setup Fax Operation
23 Used to download the FAX program.
(Only when FAX is installed.)
Inhibited Fax
24 Used clear the FAST memory data.
(Only when FAX is installed.)
Inhibited Fax
25 Used to register the FAX number for MODEM dial-in.
(Only when FAX is installed.)
Inhibited Fax
26 Used to register the external telephone number for MODEM
dial-in. (Only when FAX is installed.)
Inhibited Fax
27 Used to register the voice-warp transfer number.
(Only when FAX is installed.)
Inhibited Fax
28 Used to record a sound message.
(Only when FAX is installed.)
Inhibited Fax
29 Used to clear the telephone directory.
(Only when FAX is installed.)
Setup Fax Operation
30 Used to check TEL/LIU status change. Setup Fax Operation
31 Used to set the TEL/LIU status. Setup Fax Operation
32 Used to check received data. Inhibited Fax
33 Used to check signal detection. Inhibited Fax
34 Used to measure and display the communication time. Setup Fax Operation
35 Modem program rewriting.(Only when FAX is installed.) Operation test, check Fax Operation
36 Used to check interface between MFPC and MDMC.
Check is made in the data line or the command line.
Operation test, check Fax Operation
67 2 Used to check the parallel I/F operation of the printer.
(This simulation is made only in the production site and not in
the market. It requires a special tool.)
Inhibited Printer Interface,
communi-
cation
11 Used to set Enable/Disable of the parallel I/F select signal of
the printer.
Adjustment Printer Operation Interface,
communi-
cation
16 Used to check the operation of the network card. Operation test, check Printer Operation Interface,
communi-
cation
Code
Function (Content) Purpose Section Item
Main Sub
 ,     !"#$%&