17
DOCUMENT FILING PROGRAMS
Scan complete sound setting
The volume of the beep that alerts you when scanning
of an original has finished can be adjusted to two
levels.
The beep can also be turned off.
Initial resolution setting
This is used to change the default resolution setting for
"SCAN TO HDD" of the document filing function. The
default resolution is initially set to "600x600dpi". To
change the default resolution, touch the key of the
desired resolution.
Default exposure settings
This is used to change the default exposure level for
"SCAN TO HDD" of the document filing function. The
default exposure is initially set to "AUTO". If changed to
"MANUAL", the exposure level can be adjusted to five
levels. Level 1 is the lightest level and level 5 is the
darkest level.
Keyop_Sec.book 17 ページ ２００４年９月１５日 水曜日 午後８時３８分
To Next Page
Loading...
