KEY OPERATOR PROGRAMS
8-11
8
3
Press the numeric keys to store the fax
number.
Up to 20 digits can be entered.
To enter a "+", press the " " key.
To enter a hyphen, touch the [PAUSE] key. To
enter a space, touch the [SPACE] key.
If you make a mistake, press the [C] key and re-
enter the correct digit.
4
Touch the [OK] key.
You will return to the screen of step 2 and the
stored fax number will appear. To store another
number, repeat steps 2 through 4.
1
Touch the [DELETE] key.
The passcode delete screen appears.
2
Touch the key of the number you wish to
delete.
Touch the [YES] key in the message that appears to
delete the number. If you touch the [NO] key, you will
return to the passcode delete screen without deleting
the number.
PRINTING OUT SETTINGS
Settings established with the key operator programs can be verified by printing them out.
1
Press the [CUSTOM SETTINGS] key.
2
Touch the [KEY OPERATOR PROGRAMS]
key.
3
Use the numeric keys to enter the five-digit
key operator code number.
For the factory default
setting for the key
operator code number,
see page 2 of the key
operator's guide.
4
Touch the [LIST PRINT] key.
5
Touch the [KEY OPERATOR PROGRAMS
LIST] key.
6
Touch the [IMAGE SEND] key.
"KEY OPERATOR
PROGRAMS LIST
PROCESSING PRINT
DATA." appears in the
message screen and
printing begins.
To cancel printing, touch
the [CANCEL] key.
Deleting a passcode
KEY OPERATOR PROGRAMS
SENDER CONTROL
LIST PRINT
FAX DATA
RECEIVE/FORWA
DEFAULT
SETTINGS
NOTES
●
The list is printed before other jobs waiting to be printed.
●
In the screen of step 5, you can touch the [IMAGE
SENDING ACTIVITY REPORT (FAX)] key to print an
activity report (transmissions and receptions). Print
this list when you wish to check the activity record.
(see "Activity report print select setting" on page 8-6)
PRINTER
SETTINGS
KEY OPERATOR
CODE CHANGE
CONTROL
LIST PRINT
NETWORK
SETTINGS
ANTI JUNK FAX NUMBER LIST
IMAGE SENDING ACTIVITY REPORT
(FAX)
KEY OPERATOR PROGRAMS LIST
T DOCUMEN
ALL KEY OPERATOR PROGRAM
IMAGE SEND
Tiger2_fax_sec.book 11 ページ ２００４年９月１６日 木曜日 午前８時５３分
To Next Page
Loading...
