AX1100(R)
6 – 2
3. When removing the water tank (Only remained water in the tank joint is discharged.)
4. When operating the oven in order to discharge remained water (“Drain water” mode). (Remained water in
the tank joint, tube (pump motor) and engine unit assembly are discharged.)
Removing the water tank discharges remained water in the tank joint to the drip tray.
Remained water
in the tube and
the en
gine is not
discharged even
with the water
tank removed.
Remained water in the tube is delivered to the engine.
Then the engine heating element turn ON so as evap-
orate remained water in the engine unit assembly.
Remained water in the tank joint and dew condensation water in the oven cavity and
the steam exhaust duct are discharged to the dew tray.
Make sure to
remove the
water tank.
Remained water
in the tube is
delivered to the
engine unit.
To Next Page
Loading...
Need help?
General
