AX1100(R)
8 – 1
AX1100(R)
Service Manual
CHAPTER 8. TROUBLESHOOTING GUIDE
When troubleshooting the microwave oven, it is helpful to follow the Sequence of Operation in performing the checks. Many of the possible causes of
trouble will require that a specific test be performed. These tests are given a procedure letter which will be found in the “Test Procedure” section.
IMPORTANT:
If the oven becomes inoperative because of a blown fuse F2
(F8A) in the monitored latch switch - monitor switch circuit, check the monitored latch
switch and monitor switch before replacing the fuse F2
(F8A).
To Next Page
Loading...
