Sharp AY-XPM9FR - Tips about Indicator Panel

ENGLISH
GB-9
• During operation, if the outdoor temperature changes, the temperature settings will auto-
matically slide as shown in the chart.
• Mode of the unit operated fi rst will have priority over unit(s) without reference to the chart.
TIPS ABOUT AUTO MODE
In the AUTO mode, the temperature setting and mode are automatically selected according
to the room temperature and outdoor temperature when the unit is turned on.
Modes and Temperature Settings
TIPS ABOUT INDICATOR PANEL
The indicator panel will change each time you press
the DISPLAY button in the following manner.
The room temperature is
displayed.
The outdoor temperature
is displayed.
No display.
NOTES:
• The displayed temperatures are rough estimates and may vary from the actual tempera-
tures.
• Temperature display ranges
Room temperature: 0°C ~ 40°C ( is displayed when less than 0°C and when higher
than 40°C)
Outdoor temperature: –9°C ~ 45°C ( is displayed when less than –9°C and when
higher than 45°C)
• is displayed during the fi rst about 120 seconds of operation while the temperatures are
being detected.
• is displayed for 5 seconds when the unit is not in operation.
• During SELF CLEAN operation, the indicator panel will display remaining time of the opera-
tion. Room and outdoor temperature will not be displayed even if you press the DISPLAY
button.
DISPLAY
26
281810034
(°C)
(°C)
(24°C)
(25
°C)
(22
°C)
(23
°C)(24°C)
(26
°C)
the fi gures in ( ) are temperature settings
Room temp. Lamp
Outdoor temp. Lamp
Temperature
Indicator
Temperature
Indicator
Outdoor
temp.
Indoor temp.
Heat
Cool
Dry
(Room temp. -2 °C)
Heat
Heat
Cool Cool
AY-XPM7912FR.indbGB-9AY-XPM7912FR.indbGB-9 2010/04/279:03:222010/04/279:03:22