Sharp AY-XPM9FR - Coanda Airflow; Full Power Operation

ENGLISH
GB-11
FULL POWER OPERATION
In this operation, the air conditioner works at maximum power to makes the room
cool or warm so rapidly that you can use it just after you come home.
1
To activate the FULL POWER operation, press the
FULL POWER button during operation.
• The remote control will display .
• The temperature display will go off.
• The green FULL POWER lamp ( ) on the unit will
light up.
TO CANCEL
Press the FULL POWER button again.
• FULL POWER operation will also be cancelled when
the operation mode is changed, or when the unit is
turned off.
• The green FULL POWER lamp ( ) on the unit will
turn off.
NOTE:
• You can not set the temperature or fan speed during the FULL POWER operation.
1
DISPLAY
AM
COANDA AIRFLOW
In cool or dry mode, vertical airfl ow louvre is set obliquely upward to deliver cool air
to the ceiling in order to avoid direct airfl ow. In heat mode, vertical airfl ow louvre is
set downward to deliver the warm air down to the fl oor.
1
During operation, press the COANDA AIRFLOW
button.
• The remote control will display .
TO CANCEL
Press the COANDA AIRFLOW button.
1
AM
DISPLAY
NOTE:
• The COANDA AIRFLOW setting is cancelled when you press FULL POWER button while
COANDA AIRFLOW is set.
• If you want COANDA AIRFLOW operation in FULL POWER mode, press COANDA
AIRFLOW button during FULL POWER operation.
AY-XPM7912FR.indbGB-11AY-XPM7912FR.indbGB-11 2010/04/279:03:252010/04/279:03:25