Sharp AY-XPM9FR - Unit Fails to Operate; Ineffective Cooling or Heating; Remote Control Signal Issues

GB-20
Check whether the remote
control batteries have become
old and weak.
Try to send the signal again with
the remote control pointed prop-
erly towards the unit’s signal re-
ceiver window.
Check whether the remote
control batteries are installed
with the polarities properly
aligned.
If the unit appears to be malfunctioning, check the following points before calling
for service.
IF THE UNIT FAILS TO OPERATE
Check to see if the circuit breaker has tripped or the fuse has blown.
IF THE UNIT FAILS TO COOL (OR HEAT) THE ROOM EFFECTIVELY
Check the fi lters. If dirty, clean
them.
Check the outdoor unit to make
sure nothing is blocking the air
inlet or outlet.
Check the thermostat is proper
setting.
Make sure windows and doors
are closed tightly.
A large number of people in the
room can prevent the unit from
achieving the desired tempera-
ture.
Check whether any heat-gen-
erating appliances are operat-
ing in the room.
Please call for service when TEMPERATURE INDICATOR on the indicator panel blink.
BEFORE CALLING FOR SERVICE
IF THE UNIT FAILS TO RECEIVE THE REMOTE CONTROL SIGNAL
AY-XPM7912FR.indbGB-20AY-XPM7912FR.indbGB-20 2010/04/279:03:382010/04/279:03:38