5
R-90GC(S) O/M
OPERATION OF TOUCH CONTROL PANEL
The operation of the oven is controlled by pressing the appropriate keys arranged on the surface of the control
panel.
An entry signal tone should be heard each time you press the control panel to make a correct entry.
In addition the oven will beep for approximately 2 seconds at the end of the cooking cycle, or 4 times when a
cooking procedure is required.
Control Panel Display
Control Panel Display
Touch Control Panel Layout
Indicator
1098
4567
16 1712 13 14 15
11
2 31
1 AUTO COOK KEY
Press to select AUTO COOK
mode.
2 MORE (
), LESS ( ) KEYS
Press to adjust the doneness
of food in one minute
increments during cooking or
to increase/decrease the time
whilst programming the
automatic operations.
3 WEIGHT KEYS
Press to enter weight.
4 EASY DEFROST KEY
Press to defrost meat by
entering weight.
5 BASIC COOK KEY
Press to select BASIC COOK
mode.
6 RECIPES KEY
Press to select RECIPES
mode.
7 MENU KEYS
Press to select BASIC COOK
and RECIPES menu.
8 TIME KEYS
Press to enter cooking time
and clock time.
9 CLOCK KEY
Press to set clock time.
0 STOP/CLEAR KEY
Press to clear during
programming. Press once to
stop operation of oven during
cooking; press twice to cancel
cooking programme.
A DUAL KEYS
Press to select dual cooking.
B GRILL KEY
Press to select grill cooking.
C CONV. (°C) KEY
Press to select convection
cooking.
D POWER LEVEL KEY
Press to select microwave
power setting.
If not pressed, 100% is
automatically selected.
E HELP KEY
Press to get guide of keys, set
child lock, sound and refresh
cycle.
Press to obtain cooking
information.
F TIMER KEY
Press to set timer.
G INSTANT COOK/START KEY
Press to start oven after setting
programs.
Press once to cook for 1
minute on 100% or increase by
1 minute multiples each time
this key is pressed during
manual cooking.
R-90GC(S) O/M,01-14 03.7.24, 5:34 PM5
To Next Page
Loading...
Need help?
General
