R-90GC(S) O/M
6
1. Plug the oven into a power point and switch on the power. Ensure the door is closed.
2. The oven display will show "PRESS STOP".
3. Press the STOP/CLEAR key. The display will show ".0".
4. Set the clock.
5. Use the Refresh Cycle to heat the oven before using for the first time. (Please refer to page 19.)
BEFORE OPERATING
Getting Started
Press the STOP/CLEAR key once to:
1.Stop the oven temporarily during cooking.
2.Clear if you make a mistake during programming.
3.Clear the message on the display after cooking.
Press the STOP/CLEAR key twice.
Stop/Clear
To Cancel a Programme During Cooking
* To enter the present time of day 11:34 (AM or PM).
Clock Setting
This is a 12 hour clock. If you press any of the TIME keys too many times, continue to press the key until the
desired time reappears.
If you wish to know the time of day during the cooking or timer mode, press the CLOCK key. As long as your
finger is pressed on the CLOCK key, the time of day will be displayed.
1. Press the CLOCK key. 2. Enter the hours by pressing
the TIME keys.
3. Press the CLOCK
key once.
4. Enter the minutes by
pressing the TIME keys.
5. To start the clock, press
the CLOCK key once.
x 1
x 1 x 1
x 1
x 3 x 4
x 1
R-90GC(S) O/M,01-14 03.7.24, 5:34 PM6
To Next Page
Loading...
Need help?
General
