Sharp CD-BA1300H User Manual

– 7 –
CD-BA1300H
Check the supplied accessories
AM loop aerial
× 1
FM aerial
× 1
Remote control
× 1
AC power lead
× 1
Putting batteries into the remote control
2 "AA" size batteries
(UM/SUM-3, R6, HP-7 or similar)
1 Remove the battery cover.
2 Insert the batteries.
3 Replace the battery cover.
1
2
[For U.K.]
AC power lead
× 1
[Except for U.K.]
Placing the system
10 cm (4")
10 cm (4")
3
10 cm (4")
10 cm (4")
Left speaker
Black
Connections
4
AC 230 V, 50 Hz
1 Connect the AM and FM aerials.
2 Connect the speaker system.
3 Connect the AC power lead.
Right speaker
AM loop
aerial
FM aerial
1
2
Red
[For U.K.] [Except for U.K.]

Sharp CD-BA1300H Specifications

General

Brand	Sharp
Model	CD-BA1300H
Category	Stereo System
Language	English

Summary

System Connections

Connect AM and FM Aerials

Attaching the AM and FM antennas to the unit.

Connect Speaker System

Connecting the left and right speakers to the main unit.

Connect AC Power Lead

Connecting the main unit to the power source.

Recording from CDs

Prepare for Recording

Preparing the system for CD to tape recording.

Load Cassette and CD

Inserting the target cassette and source CD.

Start Recording

Resetting the Microcomputer

Perform System Reset

Procedure to reset the system's microcomputer, erasing settings.