Sharp CD-BA200 User Manual

OPERATION MANUAL
FOR YOUR RECORDS
For your assistance in reporting this unit in case of loss
or theft, please record below the model number and serial
number which are located on the rear of the unit.
Please retain this information.
Model number _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Serial number _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Date of purchase _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Place of purchase _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
MODEL
CD-BA200
HK <P=001>
MINI COMPONENT SYSTEM
Thank you for purchasing this SHARP product.
To obtain the best performance from this product,
please read this manual carefully.
It will guide you in operating your SHARP product.
CD-BA200 Mini Component System consisting of
CD-BA200 (main unit) and CP-BA200 (speaker system).
Note:
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harm-
ful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a par-
ticular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the inter-
ference by one or more of the following measures:
●Reorient or relocate the receiving antenna.
●Increase the separation between the equipment and receiver.
●Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
●Consult the dealer or an experienced radio/TV technician for help.
WARNING
FCC Regulations state that any unauthorized changes or modifications
to this equipment not expressly approved by the manufacturer could void
the user’s authority to operate this equipment.
CAUTION
RISK OF
ELECTRIC
SHOCK
DO
NOT
OPEN
The lightning flash with arrowhead
symbol, within an equilateral triangle,
is intended to alert the user to the
presence of uninsulated "dangerous
voltage" within the product’s enclosure
that may be of sufficient magnitude to
constitute a risk of electric shock to
persons.
CAUTION: TO REDUCE THE
RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR
BACK).
NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSON-
NEL.
The exclamation point within an equi-
lateral triangle is intended to alert the
user to the presence of important
operating and maintenance (servic-
ing) instructions in the literature ac-
companying the appliance.
Caution - use of controls or adjustments or per-
formance of procedures other than those specified
herein may result in hazardous radiation exposure.
WARNING: TO REDUCE THE RISK OF
FIRE OR ELECTRIC SHOCK, DO NOT EX-
POSE THIS APPLIANCE TO RAIN OR
MOISTURE.
Note:
● It is the intent of Sharp that this product be used in
full compliance with the copyright laws of the United
States and that prior permission be obtained from co-
pyright owners whenever necessary.
CD-BA200(SEC) TINSE0276AWZZ

Sharp CD-BA200 Specifications

General

CD Player	Yes
FM Radio	Yes
AM Radio	Yes
Bluetooth	Yes
USB Port	Yes
Speaker Configuration	2.0
Speakers	2-way speakers
Inputs	Aux-in
Weight (Speaker)	1.2 kg

Summary

Safety Warnings and Precautions

General Safety Instructions

Important safety instructions regarding electric shock and hazardous radiation exposure.

User Record Keeping

Section to record model number, serial number, date, and place of purchase.

Important Safeguards

General Operating and Safety Rules

Essential rules for safe installation, use, and servicing of the appliance.

Outdoor Antenna Grounding Requirements

Guidelines for grounding outdoor antennas to protect against voltage surges and static charges.

Appliance Storage and Non-Use

Advice on unplugging the appliance when left unused for extended periods.

Preventing Object and Liquid Entry

Precautions to prevent objects from falling or liquids from spilling into the unit.

Service and Repair Guidance

Conditions requiring professional service and user limitations on servicing.

General Precautions and Care

General Unit Handling and Care

Instructions on cleaning, ventilation, heat, power sources, and handling the AC plug.

Voltage Compatibility Warning

Warning about using the correct voltage to prevent fire or accidents.

Volume Control and Listening Levels

Guidance on setting volume levels and avoiding prolonged exposure to high volumes.

Compact Disc Handling and Care

Guidelines for preventing damage and mistracking of compact discs.

Cassette Tape Usage and Handling

Recommendations for tape types, loading, and protecting against accidental erasure.

Condensation Management

Instructions for handling condensation to prevent unit malfunction.

Preparation for Use

Speaker Connection Guide

Detailed instructions on connecting speaker wires to the unit terminals.

Speaker Connection Cautions

Warnings about incorrect connections, using exclusive models, and wire contact.

Bi-amp System Explanation

Explanation of the bi-amp system and its benefits for sound quality.

Speaker System Setup and Antenna Connection

Speaker Grille Removal

Step-by-step instructions for safely removing speaker grilles.

Speaker Grille Removal Caution

Caution regarding exposed speaker diaphragms when grilles are removed.

Speaker Grille Mounting

Instructions for securely re-attaching speaker grilles.

Speaker Placement Guidance

Recommendations for placing left and right speakers for optimal performance.

Antenna Connection

Instructions for connecting FM and AM antennas for optimal reception.

Antenna Placement Notes

Notes on avoiding interference from the main unit and AC power cord.

AC Power Cord Connection

Instructions for connecting the AC power cord to the unit and outlet.

Unit Operation Modes and Remote Control

Demonstration Mode Operation

Explanation of how to enter, cancel, and use the demonstration mode.

Display Brightness Adjustment

Instructions for adjusting the display brightness using the DIMMER button.

Remote Control Usage and Precautions

Guidelines for installing batteries, precautions for use, and sensor maintenance.

Setting and Displaying the Clock

Viewing the Clock Display

Instructions on how to temporarily display the current time on the unit.

Clock Display Flashing After Power Interruption

Information on why the clock display might flash after power restoration and how to fix it.

Changing the Clock Time

Step-by-step guide to adjust the hour and minute settings for the clock.

Changing Clock Time Display Mode

Instructions on how to switch between 12-hour and 24-hour time formats.

Sound Control Features

Volume Adjustment

Instructions for adjusting the volume using the unit or remote control.

Extra Bass (X-BASS) Function

Explanation of the X-BASS feature and how to activate or deactivate it.

Pre-programmed Equalizer Modes

Description of various equalizer modes (FLAT, ROCK, POP, etc.) and their effects.

Compact Disc (CD) Playback

Basic CD Playback

Step-by-step guide to inserting, selecting, and playing CDs.

CD Handling Cautions

Warnings against stacking CDs and handling them improperly.

Interrupting and Resuming CD Playback

Instructions for pausing playback and resuming it later.

Stopping CD Playback

How to stop the CD playback process.

Removing CDs from the Disc Tray

Steps to open the disc tray and remove loaded CDs.

Returning to Standby Mode After CD Use

How to put the unit into standby mode after using the CD player.

Advanced CD Functions

Selecting Discs for Playback

How to select specific discs for playback or skip to the next disc.

Auto Program Search System (APSS)

How to automatically locate the beginning of tracks on a disc.

Cue and Review Functions

How to fast forward or rewind audio tracks for previewing.

Cue and Review Operation Notes

Notes on how the unit behaves at the end of a disc during cueing or reviewing.

Random Playback Mode

How to enable random playback of tracks and how to cancel it.

Random Playback Caution

Caution regarding continuous playback if the unit is not properly stopped after random play.

CD Programming and Repeat Play

Automatic Programmable Music Selector (APMS)

How to program a sequence of tracks from multiple discs for custom playback.

Clearing Programmed Selections

Instructions for clearing previously programmed track selections.

APMS Operation Notes

Notes on how opening the tray or changing functions affects programmed selections.

Repeat Play Function

How to set the unit to continuously repeat all tracks or a programmed sequence.

Cancelling Repeat Play

How to disable the repeat play mode.

Repeat Play Operation Note

Note on ensuring the unit is properly stopped after using repeat play.

Radio Operation

Tuning Radio Stations

Instructions for manual and auto tuning to find radio stations.

Radio Tuning Notes

Notes on auto scan behavior with interference and weak signals.

Returning to Standby Mode After Radio Use

How to put the unit into standby mode after using the radio.

Last Tuned Station Recall

Information about the unit recalling the last tuned station.

Preset Tuning and Memory Storage

How to store up to 40 radio stations into memory for quick access.

Storing Stations into Memory

Step-by-step guide for storing radio stations into preset memory.

Radio Memory Recall and Erase

Recalling Memorized Radio Stations

How to select and listen to previously stored radio stations.

Radio Station Recall Note

Note on how to use the PRESET button for selecting stations or scanning.

Station Preset Backup Function

Explanation of the backup function that protects presets during power interruptions.

Preset Memory Scan

How to automatically scan through saved radio stations.

Preset Memory Scan Note

Note on what happens if no stations are stored in memory for scanning.

Erasing All Preset Radio Memory

Procedure to clear all stored radio station presets from memory.

Cassette Operation

Cassette Playback

Step-by-step guide to loading and playing cassette tapes in either deck.

Stopping Cassette Playback

How to stop the cassette playback.

Fast Forward and Rewind Cassettes

Instructions for fast forwarding and rewinding cassette tapes in TAPE 2.

Cassette Operation Cautions

Cautions regarding tape removal, changing operations, and power failures.

Recording Functions

Recording from Radio to Cassette

Steps to record radio broadcasts onto a cassette tape.

Stopping Radio Recording

How to stop recording from the radio.

CD Synchronized Recording to Cassette

How to record audio from a CD to a cassette using synchronized recording.

Stopping CD Synchronized Recording

How to stop recording from a CD.

CD Synchronized Recording Notes

Notes on tape end handling and restarting interrupted CD recordings.

Dubbing Cassette Tapes

Instructions for copying audio from one cassette to another.

Stopping Tape Dubbing

How to stop the tape-to-tape dubbing process.

Erasing Recorded Tapes

Procedure to erase content from a cassette tape.

Built-in Timer Functions

Timer Playback Setup

How to set the timer to automatically play a selected source at a specific time.

Adjusting Sleep Timer Duration

How to set and change the duration for the automatic sleep timer.

Confirming Remaining Sleep Time

How to check the remaining time for the active sleep timer.

Cancelling Sleep Timer Operation

How to disable the automatic sleep timer.

Timer Recording Setup

How to set the timer to automatically record a radio station or CD.

Cancelling Timer Operation

How to cancel any set timer recording or playback.

Changing Programmed Timer Contents

Instructions for modifying existing timer settings.

Timer Setting Retention Note

Information that timer settings are retained until a new time is entered.

Sleep Operation Explanation

How the radio, CD player, and cassette deck can be turned off automatically.

Using External Units and Headphones

Video/Auxiliary Audio Input

How to connect external audio sources like video players or auxiliary devices.

External Audio Input Hum Interference Note

Note to prevent hum interference when using the unit near a television.

Headphone Usage

Guidelines for connecting and using headphones with the unit.

Resetting the Microcomputer

Conditions for Microcomputer Reset

Reasons for resetting the microcomputer, such as incorrect display or operation.

Microcomputer Reset Caution

Warning that resetting erases all stored data including settings and presets.

Transporting the Unit

Preparing Unit for Moving

Step-by-step instructions to prepare the unit for safe transportation.

Maintenance Procedures

Internal Component Cleaning

Guidance on cleaning tape heads, pinch rollers, and laser pickup lenses.

External Cabinet Cleaning

Instructions for cleaning the unit's exterior cabinet.

Technical Specifications

General Unit Specifications

Power source, consumption, dimensions, and weight of the main unit.

Amplifier Section Specifications

Output power, output terminals, and input terminals for the amplifier.

Cassette Deck Section Specifications

Frequency response, signal/noise ratio, and wow/flutter for the cassette deck.

Speaker Section Specifications

Speaker type, input power, impedance, dimensions, and weight.

Compact Disc Player Specifications

Type, signal readout, D/A converter, frequency response, and dynamic range.

Tuner Section Specifications

Frequency ranges for FM and AM tuning.

Consumer Limited Warranty

Warranty Model Specific Details

Details like product model, warranty period, exclusions, and service locations.

Product Information and Support Contact

Contact number for obtaining supply, accessory, or product information.