Sharp CD-DD4500 User Manual

21
CD-DD4500
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Programmed Play
1 While in the stop mode,
press one of the
s s
s s
s 1 -
s s
s s
s 3
buttons to select the de-
sired disc.
2 Press the
55
55
5
3 3
3 3
3 PRESET
XX
XX
X
or
W W
W W
W PRESET
2 4 2 4
2 4 2 4
2 4 button
to select the desired track.
You can also select a track by pressing the 5/3 PRESET X or W PRE-
SET 2/4 button on the remote control.
Selected disc number
Selected track number
3 Press the MEMORY/SET
(MEMORY) button to save the
track number.
When the track is memorized, “MEMORY” will appear.
4 Repeat steps 1 - 3 for other tracks. Up to 32 tracks can be pro-
grammed.
If you make a mistake, the programmed tracks can be cleared by pressing the
CLEAR button.
5 Press the
0/R 0/R
0/R 0/R
0/R (
0 R0 R
0 R0 R
0 R) button to start playback.
CD Playback
– Programmed Play –
By specifying discs from 1 to 3, and tracks from 1 to 99, you can choose up to 32
selections for playback in the order you like.
To clear the programmed selections:
While in the stop mode, press the CLEAR button on the
remote control.
Each time the button is pressed, one track will be cleared,
beginning with the last track programmed. When all the
tracks are cleared, “MEMORY” will disappear.
Adding tracks to the program:
If a program has been previously stored, the “MEMORY” indicator will be displayed.
Then follow steps 1 - 3 to add tracks. The new tracks will be stored after the last track of
the original program.
Notes:
Opening the disc tray automatically cancels the programmed sequence.
Even if you press the POWER button to enter the stand-by mode or change the
function from CD to another, the programmed selections will not be cleared.
During program operation, random play is not possible.
Playback order

Sharp CD-DD4500 Specifications

General

Brand	Sharp
Model	CD-DD4500
Category	Stereo System
Language	English