Sharp CD-PC651H

TRANSPORTING THE UNIT
Before you move this product to a new location, proceed
as follows:
1 Press the ON/STAND-BY button to turn the power on.
2 Press the CD button.
3 Press the OPEN/CLOSE button to open the disc tray.
@ Remove all CDs inserted in the unit.
4 Press the OPEN/CLOSE button to close the disc tray.
@ Make sure that "NO DISC” is displayed.
5 Press the ON/STAND-BY button to enter the stand-by mode,
and then unplug the AC power lead from the AC socket.
RESETTING THE MICROCOMPUTER
“ Reset the microcomputer under the following conditions:
@ To erase all of the stored memory contents (clock and timer
settings, and tuner and CD presets).
lf the display is not correct.
If the operation is not correct.
Press the ON/STAND-BY button to enter the stand-by mode.
NO —6 @
Whilst pressing down the |<< / <q button and the >> / >Pr1
button, hold down the ON/STAND-BY button for ai least 1
second.
Caution:
@ The operation explained above will erase all data stored in
- memory including clock and timer settings, and tuner and CD
presets.
—_ = 1 I Internal care
@ Dirty heads, capstans or pinch rollers can cause poor sound
and tape jams. Clean these parts with a cotton swab moist-
ened with commercial head/pinch roller cleaner or isopropyl
alcohol.
@ After long use, the deck’s heads and capstans may become
magnetised, causing poor sound. Demagnetise these parts
once every 30 hours of playing/recording time by using a com-
mercial tape head demagnetiser. Read the demagnetiser’s in-
structions carefully before use.
W@ External care
@ Periodically wipe the cabinet with a sofi cloth and a diluted
soap solution, then wipe with a dry cloth.
® Do not use chemically treated cleaning cloths or other chemi-
cals.
E-30