Sharp CP-BH250 User Manual

E-10
■ Bluetooth
Bluetooth wireless technology is a short-range radio
technology that enables wireless communication between
various types of digital devices, such as mobile phone or
computer. It operates within a range of about 32 feet (10
meters) without the hassle of having to use cables to con-
nect these devices.
This unit supports the following:
Communication System: Bluetooth Specication version
2.1 Bluetooth + Enhanced Data Rate (EDR).
Support Prole : A2DP (Advanced Audio Distribution Prole)
and AVRCP (Audio/Video Remote Control Prole)
Notes when using unit with a mobile phone
● This unit cannot be used to talk over the telephone even
when there is a Bluetooth connection made to a mobile
phone.
● Please refer to the operating manual supplied with the
mobile phone for details on operation of your mobile
phone while transmitting the sound using a Bluetooth
connection.
RRMCGA409AWSA
TIMER
REMOTE
SENSOR
■ Pairing Bluetooth devices
Bluetooth devices need to be initially paired rst before they
can exchange data. Once paired, it is not necessary to pair
them again unless:
● pairing is made with more than 99 devices.
Pairing can only be made one device at a time. This
unit can be paired to a maximum of 99 devices. If sub-
sequent device is paired, the oldest device paired, will
be deleted and replaced with the new one.
● this unit is reset. All pairing information is deleted when
unit is reset.
● pairing information is deleted while repairing, etc.
Indicators:
Indicator Condition Bluetooth status
Lights up
Connected
No indication Unconnected
However, the indicator status is not displayed during
Bluetooth standby mode.
■ Pairing with other Bluetooth source devices
1 Press the ON/STANDBY button to turn the power on.
2 Press the FUNCTION button repeatedly on the main
unit or BLUETOOTH (PAIRING) on the remote control
to select Bluetooth function. “BLUETOOTH” appears
on the display.
3 Perform pairing procedure on the source device to de-
tect this unit. “XL-BH250 SHARP” will appear in the
detected devices list (if available) in the source device.
(Refer the source device operating manual for details).
Notes:
● Place the devices to be paired within 3 feet (1 me-
ter) of each other when pairing.
● Some source devices are unable to display lists of
detected devices. To pair this unit with the source
device, refer to the source device operating manual
for details.
4 Select “XL-BH250 SHARP” from the source list. If
Passcode* is required, enter “0000”.
* Passcode may be called PIN Code, Passkey, PIN
number or Password.
5 “CONNECTED” appears on the display once the unit
is successfully paired with the source device. (Pairing
information is now memorized in the unit.)
Some audio source devices may connect with the unit
automatically after pairing is completed, otherwise
follow the instructions in the source device operating
manual to start connection.
6 Press play (on remote control or source device) to start
Bluetooth streaming playback.
Notes:
● If a device such as microwave oven, wireless LAN card,
Bluetooth device or any other device that uses the same
2.4 GHz frequency is placed near the system some sound
interruption may be heard.
● The transmission distance of the wireless signal between the
device and the main unit is about 32 feet (10 m), but may vary
depending on your operating environment. If a steel concrete
or metallic wall is between the device and the main unit, the
system may not operate at all, because the wireless signal
cannot penetrate metal.
● If this unit or the source device is turned off before Bluetooth
connection is completed, pairing will not be completed and
the pairing information will not be memorized. Repeat step 1
onward to start pairing again.
● To pair with other devices, repeat steps 1 - 4 for each de-
vice. This unit can be paired to a maximum of 99 devices. If
subsequent device is paired, the oldest device paired, will be
deleted and replaced with the new one.
● Once a device is ousted or deleted from the pairing list, the
pairing information for the device is also deleted. To listen to
the sound from the device again, it needs to be re-paired.
Perform steps 1 - 4 to pair the device again.
● XL-BH250 supports Bluetooth prole AVRCP 1.4. If your de-
vice supports the same prole (refer to device manufacturer’s
specication), XL-BH250 is able to control the volume of the
device.
Note:
Some music applications do not support this feature, hence
there will be no volume synchronisation between your de-
vice and the unit even if your Bluetooth device supports such
prole.
Listening to Bluetooth enabled devices

Sharp CP-BH250 Specifications

General

Brand	Sharp
Model	CP-BH250
Category	Stereo System
Language	English