15
15-1 15-2
CX51N3/N4
GA1 HOTEL MODE APPLICATION
How to enable/disable the "Hotel Mode" ?
Ans: a) Press the R/C (FUNCTION) key until language selection appear, within five second
press the (one/two digit) key and keep pressing it for five second, then you can see
the hotel mode with four digits password.
b) Key in the four digits password starting with number "1", "3", "7", "9", then the hotel
mode will be enable, you can switch on/off the hotel mode by using R/C (volume up/
down) key.
* We recommend
Before set the hotel mode, it is better to choose ch 1 & set s-vol level Up to 75% full scale.
After set hotel mode, starting channel will be always ch 1 & maximum sound level out will
be set the half of full scale.
* If you set hotel mode in AV, starting channel will be the last ch which you received before
power off (same as normal operation)
CONDITION:
When using hotel mode, user can control "contrast", "brightness", "sharpness" and "tint"
function.
But after power off, it will return to the initial setting.
You can't use:--
Preset mode
Fine tuning
Skip mode
System selection
The others function is allowed to be used.
#1 Ch 1 is your selected
channel for hotel mode.
To Next Page
Loading...
Need help?
General