Sharp DV-NC55U - Page 11

11
DV-NC55U/C/M
26
25
Connector
28
31
29
30
32
32
34
33
(14)Remove the connector.
(15)Remove the three screws g and h.
5) Removing the cassette housing control/VTR mechanism.
(1) Remove the two screws k.
(2) Remove the two screws l.
(3) Remove the one screw ;.
(4) Remove the H/A shield case (upper) .
6) Removing the terminal plate/VTR main PWB.
(1) Remove the four screws .
(2) Remove the one screw .
7) Removing the bottom plate.
(1) Remove the six screws .
31
32
33
34