10 | P a g e
Rounding Selector
“ ”: An answer is rounded up.
“5/4”: An answer is rounded off.
“ ”: An answer is rounded down.
Note: The decimal point floats during successive calculation by
the use of or .
If the decimal selector is set to “F” then the answer is always
rounded down ( ).
Grand Total/ Rate Setting Mode Selector
“GT”: Grand Total
“ ”: Neutral
“ ”: To set up date, time, conversion rate, and tax/discount
rate, place the switch at the "RATE SET" position.
Date:
• Enter in the order of month, day and year, then press
to complete the entry.
• Use to separate month, day, and year.
• When is pressed, the number entered is
evaluated and displayed as “date” if the value is within
the following range; “Error” is displayed otherwise, and
the previously set date is restored.
Month: 1 - 12; day: 1 - 31; Year: 2000 - 2099 (in 4
digits) or 00 - 99 (in 2 digits)
To Next Page
Loading...
