14 | P a g e
Subtotal – Used to get subtotal(s) of additions and/or
subtractions. When pressed following the or
key, the subtotal is printed with the symbol “ ”
and the calculation may be continued.
By pressing this key even in the Non-print mode, the
displayed number is printed with the symbol “P”.
• When the POWER SWITCH; PRINT / ITEM COUNT MODE
SELECTOR is set “•”, “P” or “P•IC” position, and Date or
Clock is displayed, press this key to print the displayed
contents, including“#” symbol, from the left side of the paper
roll.
Example:
Date printing
#9 • 15 • 2004 • • • • • •
(When the date is September 15, 2004)
Clock printing
#10 • 30 • • • • • • • • • • A
(When the time is 10:30 a.m.)
#6 • 25 - - - - - - - - - - - - P
(When the time is 6:25 p.m.)
• When the Date / Clock printing is complete, the Calculation
mode is restored.
Used to calculate the average.
This key is used:
• To store the conversion rate (by the use of the rate setting
mode selector).
• Obtains a value by multiplying a given number with a
specified conversion rate.
To Next Page
Loading...
