24 | P a g e
General instructions:
1. Set the decimal selector as specified in each example. The
rounding selector should be in the “5/4” position unless
otherwise specified.
2. The constant/add mode selector and grand total/rate setting
mode selector should be in the “•” position (off) unless
otherwise specified.
3. The print/item count mode selector should be in the “P”
position unless otherwise specified.
4. If an error is made while entering a number, press or
and enter the correct number.
5. Negative values are printed with ‘‘–’’ symbol in red.
Printing Date and Time
To Next Page
Loading...
