Sharp EL-1197PIII

8 | P a g e
Power Switch/ Print/ Item Count Mode Selector
“OFF”: Power off.
“”: Power ON. Set to the non-print mode.
“P”: Power ON. Set to the print mode.
“P•IC”: Power ON. Set to the print and item count mode.
1. The counter will count the number of times that the key
has been pressed in addition.
Note:
• Each time the key is used in subtraction, 1 will be
subtracted from the count.
• The count is printed when the calculated result is obtained.
• Pressing of the , , , or key clears the
counter.
2. When the grand total/rate setting mode selector is in the ON
position (GT), the counter will count the number of times that
the calculation results have been stored in the grand total
memory. To print and clear the count, press the key.
3. The memory item counter will count the number of times that
the key has been pressed in the addition.
Note:
• Each time the key is used in the subtraction, 1 will be
subtracted from the count.
• The count is printed when the memory is recalled.
• Pressing of the key clears the counter.