6 | P a g e
First, pull out the insulation sheet for the memory protection
battery (installed for retaining the date/time, conversion rate, and
tax/discount rate information). Reset the calculator to initialize the
unit's state, then adjust the date and time.
Removing the insulation sheet, and resetting
1. Pull out the insulation sheet for the memory protection
battery.
2. Press the RESET switch located on the back of the unit.
(See “RESETTING THE UNIT”.)
* The clock starts, indicating the current date and time as
January 1, 2005, 12:00:00 a.m.
To Next Page
Loading...
