Sharp ER-A410 - Page 7

ER-A410/ER-A420 SERVICE (SRV) MODE
1 – 6
#908-B: Printing of GT on X report
#908-C: 1. Addition to the hourly total in void mode
2. X1/Z1 report at X2/Z2 mode
3. Resetting of consecutive number in Z1
#908-D: 1. Printing X/Z report (Except the individual cashier and indi-
vidual clerk report)
2. GT resetting at Z1 general resetting
[JOB#909] ER-A410: MRS = 2000
ER-A420: MRS = 2000
#909-A: 1. Printing of balance GT on the Z report
2. Printing of training GT on the X report
3. Printing of training GT on the Z report
#909-B: 1. Printing of data on PLU resetting report
2. All Z1 resetting in X1/Z1 mode
#909-C: 1. Printing of void made & MRG void in Z2 report
2. Printing of void made & MRG void in Z1 report
3. Balance GT resetting at Z1 general resetting
#909-D: 1. Clerk change during entry operation
2. Entry of clerk code compulsory
[JOB#910] ER-A410: MRS = 0200
ER-A420: MRS = 0200
#910-A: 1. Clerk name print on receipt when clerk is changed. (It is
always print on Journal)
2. Overlaped cashier function. (This selection is available only
for “Cashier only” system)
#910-B: 1. Cashier/Clerk code display and print.
2. Auto cashier sign off at the end of transaction
#910-C, D: Not used (Fixed at “00”)
GT1 (NET) GT2 (+) GT3 (-) 908-B
Skip
Skip
Skip 0 ★
Print 1
Print
Skip 2
Print 3
Print
Skip
Skip 4
Print 5
Print
Skip 6
Print 7
1. Addition to
the hourly
total in void
mode
2. X1/Z1 report
at X2/Z2
mode
3. Resetting of
consecutive
No.in Z1
908-C
No
Enable
No 0 ★
Yes 1
Disable
No 2
Yes 3
Yes
Enable
No 4
Yes 5
Disable
No 6
Yes 7
1. Printing X/Z report 2. GT resetting at Z1 908-D
Receipt & Journal
No 0 ★
Yes 1
Journal
No 4
Yes 5
1. Printing of
balance GT
on the Z
report
2. Printing of
training GT
on the X
report
3. Printing of
training GT
on the Z
report
909-A
YES
NO
YES 0
NO 1
YES
YES 2 ★
NO 3
NO
NO
YES 4
NO 5
YES
YES 6
NO 7
1. Printing of data on
PLU resetting report
2. All Z1 resetting in X1/
Z1 mode
909-B
Yes
Enable 0 ★
Disable 2
No
Enable 4
Disable 6
1. Printing of
void made &
MRG void in
Z2 report
2. Printing of
void made &
MRG void in
Z1 report
3. Balance GT
resetting at
Z1 general
resetting
909-C
YES
YES
NO 0
★
YES 1
NO
NO 2
YES 3
NO
YES
NO 4
YES 5
NO
NO 6
YES 7
1. Clerk change during
entry operation
2. Entry of clerk code
compulsory
909-D
Disable
No (After clerk Z1 only) 0 ★
Yes (Everytime) 2
Enable
No (After clerk Z1 only) 4
Yes (Everytime) 6
1. Clerk name print on
receipt when clerk is
changed.
2. Overlaped cashier
function 910-A
No
No 0 ★
Yes 1
Yes
No 4
Yes 5
1. Cashier/Clerk code
display and print.
2. Auto cashier sign off at
the end of transaction
910-B
Hidden
No (After cashier Z1 only) 0
Yes (Everytime) 1
Appear
No (After cashier Z1 only) 2 ★
Yes (Everytime) 3