ER-A410/ER-A420 SERVICE (SRV) MODE
1 – 8
#913-D: 1. Drawer closing compulsory
2. Error mode
3. Key touch sound
[JOB#914] ER-A410: MRS = 0100
ER-A420: MRS = 0100
#914-A: 1. Receipt issuing at no-sale
2. [NS] key separation from [TL] key for no-sale function
3. No-sale and EX drawer open
#914-B: 1. No-sale after NON ADD code entry
#914-C: 1. Void mode
#914-D: 1. CHECK CASHING
[JOB#915] ER-A410: MRS = 0020
ER-A420: MRS = 0020
#915-A, B: Not used (Fixed at “00”)
#915-C: 1. ST (-), ST (%) as many times needed/operation only once
#915-D: Not used (Fixed at “0”)
[JOB#916] ER-A410: MRS = 1000
ER-A420: MRS = 1000
#916-A: 1. Print format when and amount overlaps each other REG
mode
#916-B: 1. Finalization by charge (credit) when ST is 0 or below
2. Tendering which is smaller than the sales amount
#916-C: 1. Negative merchandise subtotal
2. Subtotal entry compulsory before tendering
3. Subtotal entry before direct non-tendering finalization
#916-D: 1. Coupon PLU printing on X/Z report
2. Net sales subtotal (NET1) printing on X/Z report
3. CHECK change total printing on X/Z report
[JOB#917] NOT USED: ER-A410: MRS = 0000
ER-A420: MRS = 0000
1. Drawer clos-
ing compul-
sory
2. Error mode 3. Key touch
sound 913-D
Non-compulsory
All lock error Enable 0
Disable 1
Mis operation
(One shot error)
Enable 2 ★
Disable 3
Compulsory
All lock error Enable 4
Disable 5
Mis operation
(One shot error)
Enable 6
Disable 7
1. Receipt
issuing at
no-sale
2. [NS] key
separation
3. No-sale and
EX drawer
open
914-A
Enable
Yes
Enable 0 ★
Disable 1
No
Enable 2
Disable 3
Disable
Yes
Enable 4
Disable 5
No
Enable 6
Disable 7
1. No-sale after # entry 914-B
Disable 0
Enable 1 ★
1. Void mode 914-C
Enable 0 ★
Disable 2
1. CHECK CASHING 914-D
Disable 0 ★
Enable 2
1. ST (-), ST (%) as many times needed/
operation only once
915-C
Unlimited 0
Once only 2 ★
1. Print format when and amount overlaps
each other REG mode
916-A
Truncate 0
2 line print 1 ★
1. Finalization by charge
(credit) when ST is 0
or below
2. Tendering which is
smaller than the sales
amount
916-B
Disable
Enable 0 ★
Disable 2
Enable
Enable 4
Disable 6
1. Negative
merchan-
dise subtotal
2. Subtotal
entry com-
pulsory
before ten-
dering
3. Subtotal
entry before
direct non-
tendering
finalization
916-C
Allow
Noncompulsory
Non-compulsory 0 ★
Compulsory 1
Compulsory
Non-compulsory 2
Compulsory 3
Disallow
Non-compulsory
Non-compulsory 4
Compulsory 5
Compulsory
Non-compulsory 6
Compulsory 7
1. Print coupon
PLU’s on
general
report
2. Print net
sales SBTL
(NET1) on
general
report
3. Print CHK
CHANGE on
general
report
916-D
Print
Print
Print 0 ★
Skip 1
Skip
Print 2
Skip 3
Skip
Print
Print 4
Skip 5
Skip
Print 6
Skip 7
To Next Page
Loading...
