12
GENERAL PROCEDURE FOR OPERATION
2. OPTIONAL STEP
• Pour liquid fabric softener into the dispenser using the amount recommended on the
package.
Avoid dripping or spilling any fabric softener on the load.
• Dilute fabric softener with warm water.
Fill dispenser with warm water until liquid reaches the base line in the case.
The dispenser is for liquid fabric softener use only.
• The liquid fabric softener will be put into the TUB automatically when final Rinse process.
3. Close the washer lid (door).
4. Press the power button.
5. Select the cycle.
6. Press the “Start/Pause” button.
1. Add measured detergent to the detergent case. (Follow manufacturer's directions for safe use)
Inlet Hole
Base Line
Softener inlet
Detergent
To Next Page
Loading...
Need help?
General