14
HOW TO CLEAN THE FILTER
Cleaning the water inlet filter
• Clean the filter when water leaks from the water inlet.
Cleaning the Lint Filter
• This washer has two type of lint Filter in order to increase lint filtering performance.
It is assembled in the middle area of Tub.(Option)
1 Pull the power
plug out before
cleaning it.
2Turn off the water
supply to the
washer and
sperate the inlet
hose.
3 Pull the inlet filter
out.
4 Remove the dirt
from the inlet filter
with a brush.
1
Pull the button with pulling
upward.
2
Open the Cover and get rid of
lint being the Inside of Filter
then close the Cover.
3
Assemble the Lint Filter as it
was, by pushing toward wall
with fixing slot.
To Next Page
Loading...
Need help?
General