Sharp ES-NFB814BWNA-EN User Manual

EN - 11
• Themainscordofyourwashing
machineisequippedwithanearthed
plug.Thisplugshouldalwaysbe
insertedtoanearthedsocketof10
amps.
• Ifyoudonothaveasuitablesocketand
fuseconformingwiththis,pleaseensure
theworkiscarriedoutbyaqualified
electrician.
• Wedonottakeresponsibilityfor
damage that occurs due to the use of
ungroundedequipment.
NOTE: Operatingyourmachine
withlowvoltagewillcausethelifecycle
ofyourmachinetobereducedandits
performancetoberestricted.
3.4 Water Inlet Hose Connection
3/4”
10 mm
1
3
2
4
1. Yourmachinemayhaveeithera
singlewaterinletconnection(cold)
ordoublewaterinletconnection(hot
andcold)dependingonthemachine
specifications.Thewhitecappedhose
shouldbeconnectedtocoldwaterinlet
and red capped hose to the hot water
inlet(ifapplicable).
• Topreventwaterleaksatthejoints,
either1or2nuts(dependingonyour
machine’sspecifications)aresupplied
inthepackagingwiththehose.Fitthese
nutstotheend(s)ofthewaterinlethose
that connect to the water supply.
2. Connectnewwaterinlethosestoa¾˝,
threaded tap.
• Connectthewhitecappedendofthe
waterinlethosetothewhitewaterinlet
valveontherearsideofthemachine
and the red capped end of the hose to
theredwaterinletvalve(ifapplicable).
• Handtightentheconnections.Ifinany
doubt,consultaqualifiedplumber.
• Waterflowwithpressureof0.1-1Mpa
willallowyourmachinetooperateat
optimumefficiency(pressureof0.1
Mpameansthatmorethan8litresof
waterperminutewillflowthroughafully
opened tap).
3. Once you have made all of the
connections,carefullyturnthewater
supply on and check for leaks.
4. Ensurethatthenewwaterinlethoses
arenottrapped,kinked,twisted,folded
or crushed.
• Ifyourmachinehasahotwaterinlet
connection,thetemperatureofthehot
watersupplyshouldnotbehigherthan
70°C.
NOTE: YourWashingMachine
must only be connected to your water
supplyusingthesuppliednewfillhose.Old
hoses must not be reused.
~ 95 cm ~ 140 cm
~ 145 cm ~ 95 cm
0 – max. 100 cm
˜
˜
95 cm
150 cm

Sharp ES-NFB814BWNA-EN Specifications

General

Door color	Black, Silver
Door hinge	Left
Motor type	Brushless
Water fill	Cold
Cord length	1.655 m
Drum volume	51 L
Control type	Buttons, Rotary
Display type	LED
Door opening	Side opening
Loading type	Front-load
Certification	CE
Drum material	Stainless steel
Product color	White
Reversible doors	No
Country of origin	Turkey
Inlet hose length	1.47 m
Door opening angle	180 °
Outlet hose length	1.8 m
Appliance placement	Freestanding
Display illumination	Yes
Package depth	577 mm
Package width	641 mm
Package height	881 mm
Package weight	65500 g
Current	10 A
Connected load	2200 W
AC input voltage	220 - 240 V
AC input frequency	50 Hz
Energy efficiency scale	A to F
Power consumption (off)	0.5 W
Power consumption (standby)	1 W
Water consumption per cycle	48 L
Energy consumption washing per cycle	0.47 kWh
Drum capacity	8 kg
Cycle time (max)	218 min
Delay start (max)	23 h
Residual moisture	53 %
Spin-drying class	B
Maximum spin speed	1400 RPM
Minimum spin speed	800 RPM
Noise level (spin)	76 dB
Noise level (wash)	50 dB
Number of washing programs	15
Add garment (pause) function	-
Cycle time (quick washing program)	15 min
EAN	4550556103848
Net weight	60500 g
Annual water consumption washing	10224 L
Annual energy consumption washing	155 kWh
UK Trade Tariff code	8450
Paper packaging weight	410 g
Plastic packaging weight	849 g
Customs product code (TARIC)	8450119000

Weight and Dimensions

Depth	527 mm
Width	597 mm
Height	845 mm
Weight	65300 g
Gross weight	66500 g