ENGLISH
2
Inatall mounting bracket 1 on the
wall
• Install it after consulting a specialist and you
can get the confirmation of the strength.
• Mount the bracket using the included wood
screws (long screws) so that it levels.
Mount the bracket to the back of the main unit
using the included small screws (2 pieces).
4
Place the 2 cushion gum
5
Mount the main unit
(1) Align the horizontal positions of mount-
ing brackets 1 and 2 and hook the bracket
2 to bracket 1.
(2) Hold the bot-
tom of the main
unit, pull the
unit towards
you and then
pull down.
6
Check the installation
• Check to make sure that the tabs on mount-
ing bracket 2 are securely mounted to the
tabs on mounting bracket 1.
• Check that the power cord is not pinched.
REMOVING THE UNIT
Pull the bottom of the unit towards you and then
lift it up.
NOTES
• When removing
the unit, use a firm
stand.
• Pull out the power
cord before remov-
ing the unit.
Cushion gum (2 pieces)
E-7
Use 4 wood screws (long screws)
Mounting
bracket 1
Wood screws
(4 pieces)
Wood
Use 3 wood screws (long screws)
Mounting
bracket 1
Wood screws
(3 units)
Wood
3
Install mounting bracket 2 onto
the main unit
Do not use wood screws
(long screws)
Mounting bracket 2
Small screws
(2 pieces)
To Next Page
Loading...
