E-6
FILTER INSTALLATION
Unplug the electrical cord before
performing any maintenance.
To maintain the quality of the filters, they are installed in the main unit and packed in plas-
tic bags. Be sure to remove the filters from the plastic bags before using the unit.
1
Remove the front Panel.
Gently grip the bottom of the front panel
and remove it by pulling the bottom gently
towards you.
2
Remove the plastic bags.
3
Place the filters accordingly.
Keep the order of filters.
4
Fix the Front Panel.
Fix the Front Panel by hooking it into
the top of the unit. Swing panel in by
pushing gently until the panel snaps
into place.
5
Record the date when you
start or replace the filters.
HEPA filter (white)
Deodorizing Pre filter (black)
Starting date of use
Replacement Filters
Replace the filters when they are no
longer removing odour or dust.
OP_FU-A80TA-TH+EN.indb 6OP_FU-A80TA-TH+EN.indb 6 8/19/11 9:28:52 AM8/19/11 9:28:52 AM
To Next Page
Loading...
Need help?
General
